EVO RS 959 Limited Edition Motorcycle Half Face | Open Face Helmet

Introducing one of the most popular series of EVO RS959 motorcycle helmet: EVO RS 959 Limited Edition in Titanium Grey. EVO RS 959 Limited Edition in Titanium Grey is the sequel to the usual EVO RS959 quality and attention to detail. For riders who want to stand out from the crowd, get this special EVO RS 959 Limited Edition in Titanium Grey.

EVO RS 959 Limited Edition is modelled after ARAI SZ RAM III and it can be safely said that the level of quality has risen throughout the batches. The similarities are intentional as the technology of the world's first diffuser-mounted motorcycle helmet, the RX-7 series, are brought and implemented on EVO RS 959 open-face helmet.

• Approved by PSB sticker
• colour: Titanium Grey

 

EVO RS 959 Limited Edition Helmet Visor

EVO RS 959 Limited Edition helmet has a narrower visor opening giving the rider a sharp look with a hint of racing stylishness. Styling designs and technology goes hand in hand when you are wearing a EVO RS 959 Limited Edition open face motorcycle helmet. See pictures below

 

EVO RS 959 Limited Edition Face Shield

EVO RS 959 Limited Edition helmet face shield is constructed such that it is unbreakable. It is made up of advanced polycarbonate material not found in common motorcycle helmet visors. As EVO RS 959 has passed the PSB TEST safety requirements, one of the criteria is how a motorcycle helmet visor will affect the rider in the case of an accident. The face shield does not twist or torque when raised or lowered.

 

EVO RS 959 Limited Edition Visor Rotation Mechanism

EVO RS 959 Limited Edition visor rotation mechanism uses the friction system to hold the face shield. When you raised the visor, it allows a virtually unlimited choice for positioning. It also keeps the face shield tight against the eye port gasket. The gasket completely surrounds the eye port and the combination of the tight fit and full gasket make the face shield watertight.

Changing the helmet visor takes a bit of skill, definitely not for the novice. You need to twist the two side pods to a 90 degree angle before you can pull them out. Do not attempt to pull out if you are unsure as the side pods are very delicate.

EVO RS 959 Limited Edition Helmet Front Air Ventilation Flow

There are upper vent scoops and rear exhaust covers to ventilate a motorcycle helmet by pulling the hot stale air out, rather than supplying fresh air in. Although EVO RS 959 Limited Edition is a half face motorcycle helmet, its Air Ventilation System is comparable to a full face motorcycle helmet. There is a central air diffuser mounted at the top center.

EVO RS 959 Limited Edition Helmet Rear Air Exhaust Ventilation

The positive air flow forces air into the top of the helmet through a series of curving holes near the front of the diffuser, and negative air pressure is used towards the back of the diffuser to pull air through the helmet and out to the back.

EVO RS 959 Helmet Top Ventilation

There are three top mounted buttons which act as a shut off ventilation system. There are two on/off rocker switches on the top of the EVO RS 959 Limited Edition helmet. By pushing the rocker switch forward, you can control the air flow pressures that would otherwise disrupt the air flowing.

EVO RS 959 Limited Edition Helmet Shell Construction

There are many "revolutionary" shell-construction materials out there in the marketplace however tests have shown that fiberglass-based construction does the best job of performing a motorcycle-helmet shell's main job - spreading and dissipating impact energy through strength, structural integrity and impact-flexibility. That is why EVO RS 959 Limited Edition helmet has passed stringent Singapore Safety Standards SS 9: 1992 and attained the "PSB TEST" label.

EVO RS 959 Limited Edition Helmet Lining

EVO RS 959 Limited Edition helmet has a top quality plush lining, which is removable and washable.  It consists of separate pieces including the cheek pads and inner lining.  Mesh linings material allow moisture and heat to transfer from your head into the airflow inside the helmet. This leaves your head dry and cool during your ride.

The chin strap uses the simple yet effective double D-ring closure system, and there's a nice black button provided to secure the loose end of the strap when riding. (see pictures) Small details such as an engraved "EVO" logo at the D-ring makes you feel owning a EVO RS 959 Limited Edition helmet is truly worthwhile.

As you can see from picture, the neck opening is not round, however there are more cushion material added to the neck roll area so that you can feel comfortable.

Why is it Limited Edition?

Because the color production for this EVO RS 959 in Titanium Grey is severely limited. This means that you could be one of the few special ones among your friends to own this collectible EVO RS959 in Titanium Grey color.

EVO RS 959 Limited Edition Helmet Size Chart

* S : 55-56cm
* M : 57-58cm
* L : 59-60cm
* XL : 61-62cm

Unsure of which helmet size to take? Please click here for instructions and watch video
on how to measure your head for the correct helmet size

EVO RS 959 Limited Edition Helmet Features

• Ventilation: Dynamic system with three front and rear exhaust vents
• Shield Mechanism: Visor rotation mechanism with side pods
• Removable inner lining (can be taken out to wash)
• Aerodynamic designed for Optimum AirFlow

EVO RS 959 Limited Edition Helmet Accessories

Additional accessories : Iridium Visor aka Rainbow visor / Smoked visor

How To Buy Helmet in Singapore (FREE Delivery)

Call / SMS the number below. HelmetBoys.com provide FREE delivery
right to your doorstep. Please provide us the required size and
arrangement of delivery time.

How To Buy Helmet to Malaysia

For Malaysian customers please check out the procedure to buy
helmets below.

How to Buy Helmets to Malaysia

HelmetBoys.com overseas shipping details