New Products
Introducing New SPINO range of motorcycle helmets by EVO Design Team which designed EVO RS959, EVO RS747. Motorcycle helmets can be classified into open-face, full-face, flip-up or half-face helmet. There isn't really much to distinguish themselves other than style, colors and graphics. A motorcycle helmet looks like a helmet, more or less.
SPINO has taken a lead in the new "RETRO" trend in motorcycle helmet design. Given today's identical boring design open-face motorcycle helmets, SPINO Retro Classic motorcycle helmet inject some fresh air into motorcycle helmet styling. Although HYPER Classic helmet has already produced a helmet with built in sun visor, SPINO Retro Classic has further enhanced the "RETRO" into a higher level.
What is so special about SPINO Retro Classic is combining today's technology breakthrough in-built sunvisor with timeless design. This proves to be a instant hit and widely popular among tropical and sunny countries like Singapore and Malaysia.
SPINO Retro Classic motorcycle helmet has a huge clear visor that provides a very wide and high view of the road. It is definitely more comfortable and safer when riding with a nearly unobstructed view. The rubberized wheel on the left-hand side rotates the tinted visor up and down. The wide clear visor has two detents and it feels relatively sturdy. The visor can be flipped up and it stays in place. There is a solid lever behind the left sidepod.

Some of us may have the experience of riding along highway and the glaring sun ray blinded you for a few seconds and this is extremely dangerous. With the built-in sunvisor, the rider can conveniently pull down the sun visor when face with bright sunshine. As a motorcyclist, we do not have the luxury of a sun shade that can be conveniently pull down by a car driver. Other benefits include:
For those who are wearing spectacles, you can be assured that the sun visor does not get in the way of your glasses when it is being pulled down.
SPINO Retro Classic motorcycle helmet incorporates side plates without screws. Although the side knob is not as refined as HYPER Classic helmet, it fufill its basic function of hiding the ugly visor rotation mechanism. Just behind the left side knob lies the built-in sunvisor lever. See pictures below. To activate the sun visor, you push the lever upwards and it stays there. To pull up the sun visor, you can use your thumb to push the lever downwards.

Why is the lever at the left side? The reason is because when you want to pull down the sunvisor while you are riding, your left hand which is not controlling the fuel is free to do so.
By applying the retro design philosophy, EVO designers include two frontal air intake vents that cleverly allow airflow inside without obstructing its smooth outline. Unlike the modern motorcycle racer helmet version with huge exaggerated air ventilation intakes and exhaust vents that scream for attention. The frontal air intake vents have dimples so that you can easily slide the "open/close" shutter. See picture below.

SPINO Retro Classic helmet has also dual rear air exhaust vents that are cleverly molded into the helmet's contour. You can also slide the open/close the shutters easily. As you look closely, the contour outline is a bit protruded at the back to streamline the airflowing.

SPINO Retro Classic helmet has the ABS shell construction. This is considered the best material for performing a motorcycle-helmet shell's main job - spreading and dissipating impact energy through strength, structural integrity and impact-flexibility.

SPINO Retro Classic motorcycle helmet has passed stringent Singapore Safety Standards SS 9: 1992 and attained the "PSB TEST" label. To become PSB Approved which is under Singapore Traffic Police supervision, every batch of motorcycle helmets imported into Singapore are batch tested. This greatly increase the cost but ensure motorcycle helmets imported are of certain quality standards.
SPINO Retro Classic helmet has been labeled as meeting U.S.A DOT standard- DOT approved. It does conform to the European Commission standard ECE 22.05 standard though, so it's legal for use by European motorbike riders.

SPINO Retro Classic motorcycle helmet interior consists of separate pieces including the cheek pads and lining. SPINO helmet cheekpads are quite thick with tiny ventilated holes to transfer the heat away from your ear if you look closely at the picture below.

SPINO Retro Classic motorcycle helmet liner material is very comfortable, which is removable and washable.

Ventilated inner linings allow moisture and heat to transfer from your head into the airflow inside the helmet. This leaves your head dry and cool during your ride. The chin strap uses the simple yet effective double D-ring closure system.

* S : 55-56cm
* M : 57-58cm
* L : 59-60cm
* XL : 61-62cm
Unsure of which helmet size to take? Please click here for instructions and watch video
on how to measure your head for the correct helmet size
For those motorcycle riders who are looking for simple and elegant design without the bells and whistles. do not like exxagerated design

Call / SMS the number below. HelmetBoys.com provide FREE delivery
right to your doorstep. Please provide us the required size and
arrangement of delivery time.
For Malaysian customers please check out the procedure to buy
helmets below.
How to Buy Helmets to Malaysia
HelmetBoys.com overseas shipping details

![]()
![]()
Choose a currency below to display product prices in the selected currency.